Step 4 :
Now it's time to apply the ceramic coating! This is an exciting step and when applied correctly will produce a candy like shell that has incredible appearance, color enhancement and GLOSS. Start by checking your suede applicator block for any contaminants. Apply a solid line of EVO 5H or 7H to the center of the applicator (approx 4 to 6 fine drops). Work on a half-panel at a time, lightly dragging the applicator across the paint in overlapping lines until you have full coverage and then once more in the opposite direction. We refer to this process as "Crosshatching".
Let the coating sit on the paint until it turns from clear to lightly hazy, an almost "milky appearance" (2-3 Minutes Depending on Climate, Temp, & Humidity). We recommend working one section or panel at one time. DO NOT apply to whole car then remove then will result in great difficulty to level and remove. This is not a wax or polish, it is a high solid glass resin that goes from liquid to a solid glass state!!Once the entire cars' surface has been coated we recommend you repeat steps 7-8 to apply at least one more coat to make 2 total, and up to 3 coats. But no more than 4 coats!
Use your lights, detail spray, and a dry microfiber towel to perform a final check. Remove any streaking or hazing that may be left behind. We also recommend pulling into direct Sun Light to inspect under natural light for any residual high or low spots that may still appear. Congrats on applying your first ceramic coating!!
3 YEAR / 40K MILE DURABILITY! Evo Quartz Coating 7H offers amazing semi-permanent all surface protection. Featuring the latest in nano-glass coating technology. Evo Quartz 7H has a very slick feel and produces a ultra high-gloss candy-like appearance.
- One (1) 50mL EVO 7H Ceramic Coating
- One (1) 22oz Gloss Enhancer Detail Spray
- Two (2) Micro Suede Ceramic Applicator Blocks
- Two (2) Black Dual Pile Edgeless Microfiber Towels